A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the edge of the board to minimize signal loss. A 50-ohm microstrip line should be used to connect the device to the antenna.
The device requires a 3.3V power supply and a bias current of 30mA. A voltage regulator and a bias resistor network can be used to ensure proper biasing. The datasheet provides a recommended bias circuit.
The SPF5043ZSR can handle up to 2W of continuous wave (CW) power. However, the device can handle higher peak powers for short durations. It's essential to ensure the device is properly heat-sinked to prevent overheating.
The SPF5043ZSR has a complex impedance of 12.5 - j15 ohms at 2.4 GHz. A pi-network or a T-network can be used to match the device to a 50-ohm system. The datasheet provides a recommended matching circuit.
The SPF5043ZSR operates from -40°C to 85°C. However, the device's performance may degrade at higher temperatures. It's essential to ensure proper heat-sinking and thermal management to maintain optimal performance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
SPF5043ZSR Overview
Use the download button to access the SPF5043ZSR 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like SPF50,
or try a keyword search, such as RF/Microwave Amplifiers
About Qorvo
Qorvo is a prominent American semiconductor company that specializes in the design and manufacturing of radio frequency (RF) solutions. The company was formed in 2015 through the merger of TriQuint Semiconductor and RF Micro Devices. Qorvo's product portfolio encompasses a wide range of RF components and semiconductor technologies used in various applications, including wireless communications, aerospace and defense, and IoT (Internet of Things) devices.
