TDK recommends a PCB layout with a solid ground plane, short and wide traces for the input and output, and a decoupling capacitor (e.g., 100nF) between the input and ground to minimize noise and ensure stable operation.
Use a reflow soldering process with a peak temperature of 260°C (500°F) and a dwell time of 30-60 seconds. Ensure the PCB is clean and free of oxidation, and use a solder paste with a melting point of 217°C (423°F) or higher.
The SPM5010T-100M-LR can operate from -40°C to 125°C (-40°F to 257°F), but the maximum operating temperature range may vary depending on the specific application and environmental conditions.
Yes, the SPM5010T-100M-LR is designed to withstand vibrations up to 10G (98m/s²) in the frequency range of 10-2000Hz, but it's recommended to perform additional testing and validation for specific vibration profiles.
Use ESD protection devices (e.g., TVS diodes) on the input and output lines, and ensure that the PCB and assembly process follow ESD-safe handling procedures to prevent damage to the device.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SPM5010T-100M-LR Overview
Use the download button to access the SPM5010T-100M-LR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SPM50,
or try a keyword search, such as Fixed Inductors
About TDK
TDK-Lambda is a global supplier of power supplies and related products. It is a subsidiary of TDK Corporation, a leading electronics company based in Japan. TDK-Lambda specializes in designing and manufacturing a wide range of AC-DC power supplies, DC-DC converters, programmable power supplies, and EMC/EMI filters for various industries and applications.
