SR560 - HY Electronic

SR560 Frequently Asked Questions (FAQs)

• What is the input impedance of the SR560?
  The input impedance of the SR560 is typically around 1MΩ, but it can vary depending on the gain setting and frequency range.
• How do I choose the correct gain setting for my application?
  The gain setting depends on the amplitude of the signal you want to measure. A higher gain setting is suitable for small signals, while a lower gain setting is suitable for larger signals. You can start with a medium gain setting and adjust as needed to avoid saturation or clipping.
• What is the noise floor of the SR560?
  The noise floor of the SR560 is typically around 10nV/√Hz at 1kHz, but it can vary depending on the gain setting and frequency range. You can refer to the datasheet for more detailed noise floor specifications.
• Can I use the SR560 to measure high-frequency signals?
  Yes, the SR560 can measure high-frequency signals up to 100kHz. However, the gain and bandwidth of the amplifier may decrease at higher frequencies, so you may need to adjust the gain setting and filter settings accordingly.
• How do I calibrate the SR560?
  The SR560 does not require calibration. It is a plug-and-play device that is calibrated at the factory. However, you may need to adjust the offset voltage and gain settings to optimize the performance for your specific application.