SR560 footprint, schematic symbol and 3D model by Multicomp Pro

Symbol

PCB Footprints

3D Models

SR560 Details

The input impedance of the SR560 is typically around 1MΩ, but it can vary depending on the gain setting and frequency of operation.
The gain setting depends on the amplitude of your signal and the desired output amplitude. A good starting point is to set the gain to 1x and adjust from there based on your signal amplitude and desired output.
The bandwidth of the SR560 is typically around 1MHz, but it can vary depending on the gain setting and frequency of operation.
Yes, the SR560 can amplify high-frequency signals up to 1MHz, but the gain and bandwidth may be reduced at higher frequencies.
To reduce noise, use a low-pass filter, such as a RC filter, to filter out high-frequency noise. You can also use shielding and grounding to reduce electromagnetic interference.

Community Provided

System Verified

Community Approved

Use the download button to access the SR560 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search or try a keyword search, such as Rectifier Diodes

If you searched for SR560, you might also be interested in these parts:

Showing 0 results

Image	Part Number	Model
	SB560 Sangdest Microelectronics (Nanjing) Co Ltd Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 60V V(RRM), Silicon, DO-201AD
	MBR560_AY_10001 PanJit Semiconductor Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 60V V(RRM), Silicon, DO-201AD
	SB560-T3 Won-Top Electronics Co Ltd Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 60V V(RRM), Silicon, DO-201AD
	SB560 Lite-On Semiconductor Corporation Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, 60V V(RRM), Silicon, DO-201AD
	SR506-B Diodes Incorporated Rectifier Diode, Schottky, 1 Phase, 1 Element, 5A, Silicon
For a full list of alternate parts for SR560, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →