A symmetrical layout with a solid ground plane and short, direct connections to the capacitor pads is recommended. Avoid routing signals under or near the inductor to minimize electromagnetic interference.
The self-resonance frequency (SRF) is typically above the operating frequency range. To minimize its impact, use a series resistor or a damping circuit to reduce the Q factor, and ensure the inductor is not operated near its SRF.
The maximum allowed voltage is not explicitly stated in the datasheet, but it's typically limited by the insulation voltage rating of the inductor. For the SRF3225TP-102Y, the insulation voltage rating is 500 Vrms. However, it's recommended to derate the voltage to ensure reliable operation.
The inductor's temperature range affects its inductance value, DC resistance, and saturation current. The SRF3225TP-102Y is rated for -40°C to +125°C. Operating the inductor outside this range may result in reduced performance, increased losses, or even damage.
Yes, but be aware of the inductor's high-frequency losses, which can lead to increased temperatures and reduced efficiency. Ensure the inductor is properly selected for the switching frequency, and consider using a shielded or low-loss inductor design.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SRF3225TP-102Y Overview
Use the download button to access the SRF3225TP-102Y schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SRF32,
or try a keyword search, such as Data Line Filters
