SRP1050WA-100M footprint, schematic symbol and 3D model by Bourns

Symbol

PCB Footprints

3D Models

SRP1050WA-100M Details

Bourns recommends a symmetrical PCB layout with a solid ground plane, and keeping the input and output traces as short as possible to minimize inductance and radiation. A 4-layer PCB with a dedicated power plane and a solid ground plane is also recommended.
To ensure reliability in high-temperature applications, it is recommended to derate the power rating of the SRP1050WA-100M according to the temperature derating curve provided in the datasheet. Additionally, ensure good airflow and thermal management around the device, and consider using a heat sink if necessary.
Bourns recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, and a voltage rating of at least 50V. The capacitor should be placed as close as possible to the input pins of the SRP1050WA-100M.
Yes, the SRP1050WA-100M can be used in a parallel configuration to increase the output current. However, it is recommended to ensure that the output currents of each device are matched and that the devices are properly synchronized to avoid oscillations and instability.
Bourns recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, and a voltage rating of at least 50V. The capacitor should be placed as close as possible to the output pins of the SRP1050WA-100M.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the SRP1050WA-100M schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like SRP10, or try a keyword search, such as Fixed Inductors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →