Bourns recommends a symmetrical PCB layout with a solid ground plane, and keeping the input and output traces as short as possible to minimize inductance and noise. A 4-layer PCB with a dedicated power plane is also recommended.
Bourns recommends using a soldering iron with a temperature of 250°C to 260°C, and applying a small amount of solder paste to the pads. The inductor should be placed on the PCB with the terminals aligned with the pads, and then soldered using a gentle touch to avoid applying excessive pressure.
The SRP1235-R68M has an operating temperature range of -40°C to +125°C, with a derating of 1.5% per degree Celsius above 80°C.
Yes, the SRP1235-R68M is designed to withstand high-vibration environments, with a vibration rating of 10-2000 Hz, 10 G peak acceleration, and a shock rating of 100 G, 11 ms duration.
Bourns recommends handling the inductor with ESD-protective equipment, such as wrist straps, mats, and bags, to prevent damage from electrostatic discharge. The inductor should also be stored in its original packaging or an ESD-protective container when not in use.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SRP1235-R68M Overview
Use the download button to access the SRP1235-R68M schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SRP12,
or try a keyword search, such as Fixed Inductors
