Bourns recommends a symmetrical PCB layout with a solid ground plane, and keeping the input and output traces as short as possible to minimize inductance and noise. A 4-layer PCB with a dedicated power plane is also recommended.
To ensure reliability, it's essential to follow the recommended derating curves for temperature and output current. Additionally, ensure good airflow, and consider using a heat sink or thermal interface material to reduce the junction temperature.
The maximum allowed voltage drop across the SRP1265WA-150M is 150mV. Exceeding this value may affect the regulator's performance and stability.
Yes, the SRP1265WA-150M can be used in a parallel configuration to increase the output current. However, it's essential to ensure that the output voltages are matched and the input capacitors are properly sized to prevent oscillation.
Bourns recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, and a voltage rating of at least 25V. The capacitor should be placed as close as possible to the input pin of the regulator.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SRP1265WA-150M Overview
Use the download button to access the SRP1265WA-150M schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SRP12,
or try a keyword search, such as Fixed Inductors
