Bourns recommends a symmetrical PCB layout with a solid ground plane, and keeping the input and output traces as short as possible to minimize inductance and radiation. A 4-layer PCB with a dedicated power plane and a dedicated ground plane is also recommended.
To ensure reliability in high-temperature applications, it is recommended to derate the power rating of the SRP6030WA-100M according to the temperature derating curve provided in the datasheet. Additionally, ensure good airflow and thermal management around the device, and consider using a heat sink if necessary.
Bourns recommends a soldering profile with a peak temperature of 260°C (500°F) for a maximum of 10 seconds, and a minimum temperature of 217°C (423°F) for a minimum of 90 seconds. A soldering iron with a temperature range of 350°F to 400°F (175°C to 200°C) is also recommended.
Yes, the SRP6030WA-100M can be used in a parallel configuration to increase the power rating. However, it is recommended to ensure that the devices are matched in terms of electrical characteristics, and that the PCB layout is designed to minimize mismatch and ensure equal current sharing between the devices.
Bourns recommends using a minimum of 10uF ceramic capacitor at the input and output of the SRP6030WA-100M to ensure stability and reduce noise. The capacitor should have a voltage rating of at least 50V and a temperature rating of at least 125°C.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SRP6030WA-100M Overview
Use the download button to access the SRP6030WA-100M schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SRP60,
or try a keyword search, such as Fixed Inductors
