SRR0805-680K - Bourns

SRR0805-680K Frequently Asked Questions (FAQs)

• What is the recommended land pattern for SRR0805-680K?
  The recommended land pattern for SRR0805-680K is a rectangular pad with a size of 0.8mm x 0.5mm, with a non-solder mask defined (NSMD) pad shape. The pad should be centered on the component and have a minimum clearance of 0.1mm from the component body.
• Can I use SRR0805-680K in a high-temperature environment?
  The SRR0805-680K is rated for operation up to 150°C, but it's recommended to derate the component's current rating by 1.5% per degree Celsius above 125°C. It's also important to ensure that the component is properly soldered and mounted to prevent thermal stress.
• How do I handle the SRR0805-680K during assembly and rework?
  The SRR0805-680K is a sensitive component and requires careful handling during assembly and rework. It's recommended to use a no-clean or low-residue flux, and to avoid exposing the component to excessive heat, moisture, or mechanical stress. Rework should be performed using a low-temperature soldering iron and a gentle touch to avoid damaging the component.
• What is the equivalent series resistance (ESR) of the SRR0805-680K?
  The ESR of the SRR0805-680K is not explicitly stated in the datasheet, but it can be estimated to be around 0.5 ohms based on the component's internal construction and materials. However, this value may vary depending on the specific application and operating conditions.
• Can I use the SRR0805-680K in a high-frequency application?
  The SRR0805-680K is designed for general-purpose use and may not be suitable for high-frequency applications above 100 kHz. The component's internal inductance and capacitance may cause resonance and affect its performance at high frequencies. It's recommended to consult with Bourns Inc or a qualified engineer for specific guidance on high-frequency applications.