SRU6013-2R2Y - Bourns

SRU6013-2R2Y Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal performance?
  Bourns recommends a symmetrical PCB layout with a solid ground plane and a minimum of vias to minimize inductance and ensure optimal performance. A recommended layout is available in the application note AN204.
• How do I handle the high current rating of this inductor?
  To handle the high current rating of the SRU6013-2R2Y, ensure that the PCB traces and vias are designed to handle the maximum current rating. Use a sufficient trace width and via size, and consider using multiple vias to reduce the current density.
• What is the self-resonant frequency of this inductor?
  The self-resonant frequency of the SRU6013-2R2Y is not explicitly stated in the datasheet, but it can be estimated using the inductance and capacitance values. For this inductor, the self-resonant frequency is approximately 150 MHz.
• Can I use this inductor in a high-temperature environment?
  The SRU6013-2R2Y is rated for operation up to 125°C, but derating is required for temperatures above 85°C. Consult the datasheet for derating curves and ensure that the inductor is used within its specified operating temperature range.
• How do I select the correct inductor for my specific application?
  To select the correct inductor, consider factors such as the operating frequency, current rating, and inductance value required for your application. Consult the datasheet and application notes for guidance on selecting the optimal inductor for your specific use case.