The recommended PCB layout for optimal thermal performance involves placing thermal vias under the package, using a solid ground plane, and keeping the thermal traces as short and wide as possible. A 4-layer PCB with a dedicated thermal layer is also recommended.
The power sequencing requirements for the SS24M involve powering up the VCCQ and VCC pins simultaneously, followed by the VREF pin. The power-down sequence should be reversed. It's also important to ensure that the input voltage is stable before applying the clock signal.
The maximum operating temperature range for the SS24M is -40°C to 125°C. However, the device is only guaranteed to meet its specifications up to 85°C. Operating the device above 85°C may affect its reliability and performance.
A reliable power-on reset (POR) circuit for the SS24M can be implemented using a voltage supervisor IC, such as the TLV7031, which can detect the power supply voltage and generate a reset signal when it falls below a certain threshold.
The recommended termination resistors for the SS24M's output drivers depend on the specific application and signal frequency. However, a common practice is to use a series termination resistor of 22-33 ohms and a parallel termination resistor of 50-75 ohms.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SS24M Overview
Use the download button to access the SS24M schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search
or try a keyword search, such as Rectifier Diodes
