The recommended PCB layout for the SS36A involves keeping the input and output traces as short as possible, using a solid ground plane, and placing a 10uF capacitor between the VIN and GND pins to filter out noise.
To ensure stability, make sure to follow the recommended PCB layout, use a sufficient input capacitor (e.g., 10uF), and add a 1kΩ resistor in series with the output capacitor to prevent oscillation.
Although the datasheet specifies a maximum input voltage of 36V, it's recommended to limit the input voltage to 30V to ensure reliable operation and prevent damage to the device.
The SS36A is rated for operation up to 85°C, but its performance may degrade at higher temperatures. If you need to operate the device in a high-temperature environment, consider using a heat sink or a thermally-enhanced package.
The output voltage ripple of the SS36A can be estimated using the formula: ΔVout = (Iout * Rcoil) / (2 * fsw * Cout), where Iout is the output current, Rcoil is the inductor's DC resistance, fsw is the switching frequency, and Cout is the output capacitor value.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SS36A Overview
Use the download button to access the SS36A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search
or try a keyword search, such as Rectifier Diodes
Suggested Parts
If you searched for SS36A, you might also be interested in these parts:
