SSF-LXH103UWC footprint, schematic symbol and 3D model by Lumex

Symbol

PCB Footprints

SSF-LXH103UWC Details

The recommended operating temperature range for the SSF-LXH103UWC is -40°C to 85°C.
Proper thermal management can be achieved by providing a heat sink or a metal core PCB, and ensuring good airflow around the LED module. The thermal pad on the bottom of the module should be soldered to a copper plane on the PCB to facilitate heat dissipation.
The typical forward voltage of the SSF-LXH103UWC is around 3.2-3.4V, but it can vary depending on the operating current and temperature.
No, it's not recommended to drive the SSF-LXH103UWC with a constant voltage source. The module requires a constant current source to operate within its specified ratings. A constant voltage source can cause the LED current to vary, leading to inconsistent brightness and potentially reducing the module's lifespan.
The MSL of the SSF-LXH103UWC is 3, which means it can be exposed to a maximum of 30°C/60% RH for 192 hours before soldering. Proper handling and storage procedures should be followed to prevent moisture absorption.

Community Provided

System Verified

Community Approved

Use the download button to access the SSF-LXH103UWC schematic symbol and PCB footprint.

To find more CAD model downloads similar to this part, try a partial part number search, like SSF-L, or try a keyword search, such as Visible LEDs

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →