The recommended PCB footprint for the ST10-125T1KI is a rectangular pad with dimensions of 5.5 mm x 3.5 mm, with a thermal pad of 2.5 mm x 2.5 mm in the center. The pad should have a solder mask defined (SMD) and a non-solder mask defined (NSMD) area around the thermal pad.
To ensure reliable soldering, use a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point of 217°C to 220°C. Apply a small amount of solder paste to the PCB pads, and use a reflow oven or a hot air gun to solder the component. Avoid using excessive solder or flux, as it can cause bridging or shorts.
The maximum allowed voltage derating for the ST10-125T1KI is 10% of the rated voltage. For example, if the rated voltage is 125 V, the maximum allowed voltage derating is 12.5 V. Exceeding this derating may reduce the component's reliability and lifespan.
The ST10-125T1KI is designed for low-frequency applications up to 100 kHz. While it may be possible to use it in high-frequency applications, the component's performance and reliability may be affected. It's recommended to consult with Vishay Intertechnologies or a qualified engineer to determine the suitability of the component for high-frequency applications.
The ST10-125T1KI has a high power dissipation rating, so proper thermal management is crucial. Ensure good airflow around the component, and consider using a heat sink or thermal interface material (TIM) to reduce the thermal resistance. The maximum allowed junction temperature is 150°C, so monitor the component's temperature and adjust the thermal management accordingly.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ST10-125T1KI Overview
Use the download button to access the ST10-125T1KI schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ST10-,
or try a keyword search, such as Tantalum Capacitors
