STM32F301C6T7 - STMicroelectronics

STM32F301C6T7 Frequently Asked Questions (FAQs)

• What is the maximum clock frequency of the STM32F301C6T7?
  The maximum clock frequency of the STM32F301C6T7 is 72 MHz, but it can be overclocked to 80 MHz with some limitations.
• How do I configure the clock settings for the STM32F301C6T7?
  The clock settings can be configured using the Clock Control Register (RCC) and the Power Control Register (PWR). The RCC register is used to select the clock source, while the PWR register is used to configure the voltage regulator and power modes.
• What is the difference between the STM32F301C6T7 and the STM32F303C6T7?
  The main difference between the two microcontrollers is the number of peripherals and the amount of flash memory. The STM32F301C6T7 has 256 KB of flash memory and fewer peripherals, while the STM32F303C6T7 has 512 KB of flash memory and more peripherals, including a USB OTG interface.
• How do I use the DMA controller on the STM32F301C6T7?
  The DMA controller can be used to transfer data between peripherals and memory without involving the CPU. To use the DMA controller, you need to configure the DMA channel, set the transfer mode, and enable the DMA interrupt. The DMA controller can be used to transfer data between peripherals such as UART, SPI, and I2C, and memory locations.
• What is the power consumption of the STM32F301C6T7?
  The power consumption of the STM32F301C6T7 depends on the operating mode and the clock frequency. In the lowest power mode (Stop mode), the power consumption is around 2.5 μA/MHz. In the highest power mode (Run mode), the power consumption is around 350 μA/MHz.