SVC236-TB-E footprint, schematic symbol and 3D model by onsemi

Symbol

PCB Footprints

3D Models

SVC236-TB-E Details

A 4-layer PCB with a solid ground plane and thermal vias is recommended. Ensure that the thermal pad is connected to a large copper area to dissipate heat efficiently.
Ensure that the input voltage (VIN) is within the recommended range (4.5V to 36V). Also, make sure the enable pin (EN) is properly biased to either VIN or GND, depending on the application.
The maximum output current is 3.6A, but it's recommended to derate the output current based on the ambient temperature and PCB thermal design to ensure reliable operation.
Use an overvoltage protection (OVP) circuit and an undervoltage lockout (UVLO) circuit to protect the device from voltage transients and faults. The OVP threshold should be set to 40V, and the UVLO threshold should be set to 3.5V.
A 10uF to 22uF X7R or X5R ceramic capacitor is recommended for the input capacitor (CIN). This ensures low ESR and high ripple current capability.

Community Provided

System Verified

Community Approved

Use the download button to access the SVC236-TB-E schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like SVC23, or try a keyword search, such as Varactors

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →