The recommended operating voltage range for the TC4S11F is 4.5V to 5.5V, although it can operate from 3V to 6V with reduced performance.
To ensure proper power-on and power-off, it's recommended to use a power-up and power-down sequence with a minimum delay of 10ms between the VCC and GND pins.
The maximum frequency for the clock input (CLK) pin is 100MHz, although it can operate up to 150MHz with reduced performance.
During power-on, the OE pin should be held low (active low) until the power supply has stabilized. During power-off, the OE pin should be held high (active high) to prevent unwanted output transitions.
The recommended termination scheme for the TC4S11F outputs is a series resistor (Rs) and a parallel capacitor (Cp) to GND, with Rs = 22Ω and Cp = 10pF.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TC4S11F Overview
Use the download button to access the TC4S11F schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like TC4S1,
or try a keyword search, such as Gates