The recommended operating voltage range for TC74HC05AP(F) is 2V to 6V, although it can operate from 1.5V to 7V with reduced performance.
When the input pins are not in use, they should be tied to VCC or GND to prevent them from floating and causing unintended behavior.
The maximum frequency of operation for TC74HC05AP(F) is 10MHz at 5V and 4MHz at 3V, although this can vary depending on the specific application and operating conditions.
Yes, TC74HC05AP(F) can be used in a 3.3V system, but the output voltage will be limited to around 3.1V, and the device may not meet the specified propagation delay and rise/fall times.
To ensure that the output of TC74HC05AP(F) is not damaged by overvoltage, use a voltage clamp or a series resistor to limit the voltage to the recommended maximum rating of 7V.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TC74HC05AP(F) Overview
Use the download button to access the TC74HC05AP(F) schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TC74H,
or try a keyword search, such as Gates