The recommended operating voltage range for the TC7S08F is 1.65V to 5.5V, although it can operate down to 1.4V with reduced performance.
To ensure the TC7S08F is in a low-power state during standby, set the input voltage to 0V, and make sure all input pins are at a high-impedance state or tied to VCC or GND.
The maximum frequency for the TC7S08F's oscillator circuit is 20MHz, although the recommended frequency range is 1MHz to 10MHz for optimal performance.
No, the TC7S08F is not designed to be used as a voltage regulator. It is a voltage detector with a built-in voltage regulator, but it is not intended to provide a stable output voltage for external circuits.
The detection voltage threshold of the TC7S08F can be adjusted by connecting an external resistor divider network between the VCC pin and the SENSE pin, and adjusting the ratio of the resistors to set the desired threshold voltage.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TC7S08F Overview
Use the download button to access the TC7S08F schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TC7S0,
or try a keyword search, such as Gates