The recommended operating voltage range for TC7S08FU,LF is 1.65V to 5.5V.
To ensure the stability of the output voltage, it is recommended to use a capacitor with a value of 10uF or more between the VOUT and GND pins, and to keep the output voltage pin (VOUT) as close as possible to the load.
The maximum output current of TC7S08FU,LF is 50mA.
When the junction temperature exceeds 150°C, the thermal shutdown protection is activated, and the output voltage is turned off. To handle this, ensure good heat dissipation, use a heat sink if necessary, and avoid operating the device in high-temperature environments.
The EN (Enable) pin is used to enable or disable the output voltage. When the EN pin is set to a logic high level, the output voltage is enabled, and when it is set to a logic low level, the output voltage is disabled.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TC7S08FU,LF Overview
Use the download button to access the TC7S08FU,LF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TC7S0,
or try a keyword search, such as Gates