Toshiba recommends a PCB layout with a solid ground plane and a separate layer for the CT signal to minimize noise and electromagnetic interference. Additionally, keep the CT signal path as short as possible and avoid routing it near high-frequency signals or power lines.
To ensure accurate current measurement, make sure to follow the recommended PCB layout, use a burden resistor with a low tolerance (e.g., 1%), and calibrate the CT with a known current source. Also, consider using a CT with a higher accuracy class (e.g., 0.5%) for critical applications.
The maximum operating temperature range for TCR2EF50,LM is -40°C to 125°C. However, the accuracy and linearity of the CT may degrade at extreme temperatures. Consult the datasheet for temperature-related specifications and derating factors.
While TCR2EF50,LM can measure currents up to 50 kHz, its accuracy and phase shift may degrade at higher frequencies. For high-frequency current measurement, consider using a CT with a higher bandwidth (e.g., 100 kHz or higher) and a faster response time.
To protect TCR2EF50,LM from overcurrent and overvoltage conditions, use a fuse or a current limiter in series with the CT, and consider adding overvoltage protection (e.g., a TVS diode) to the output stage. Also, ensure that the CT is not exposed to excessive mechanical stress or vibration.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TCR2EF50,LM(CT Overview
Use the download button to access the TCR2EF50,LM(CT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TCR2E,
or try a keyword search, such as Linear Regulator ICs
Suggested Parts
If you searched for TCR2EF50,LM(CT, you might also be interested in these parts:
