Traco Power recommends a PCB layout with a large copper area connected to the tab of the device to ensure good heat dissipation. A minimum of 1 square inch of copper is recommended.
Use a voltage regulator or a voltage stabilizer to regulate the input voltage to the recommended range of 36-72V. Additionally, consider using a voltage supervisor to monitor the input voltage and provide a reset signal to the system if it falls out of range.
The maximum capacitance on the output is limited by the stability of the converter. Traco Power recommends a maximum capacitance of 220uF to ensure stability. However, this value may vary depending on the specific application and output voltage.
The TEP-HS1 is rated for operation up to 85°C ambient temperature. However, derating is required for temperatures above 70°C. Consult the datasheet for derating curves and ensure proper heat sinking and airflow to maintain a safe operating temperature.
Use a TVS (Transient Voltage Suppressor) diode or a voltage clamp to protect the input of the TEP-HS1 from voltage surges and spikes. Additionally, consider using a fuse or a current limiter to protect against overcurrent conditions.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
TEP-HS1 Overview
Use the download button to access the TEP-HS1 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like TEP-H,
or try a keyword search, such as Heat Sinks
