A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the edge of the board to minimize signal reflections. A 50-ohm microstrip transmission line should be used to connect the device to the antenna.
The optimal bias point depends on the specific application and operating frequency. As a general guideline, the device should be biased at a voltage between 2.7V and 3.3V, with a current limit of 200mA. The bias voltage should be adjusted to achieve the desired output power and efficiency.
The maximum operating temperature of the TGL2208-SM is 125°C. However, the device should be derated for temperatures above 85°C to ensure reliable operation.
The device should be matched to the antenna using a pi-network or a T-network topology. The matching components should be chosen to achieve a return loss of at least 10dB at the operating frequency.
The maximum input power that the TGL2208-SM can handle is +10dBm. Exceeding this limit may result in damage to the device or reduced performance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
TGL2208-SM Overview
Use the download button to access the TGL2208-SM 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like TGL22,
or try a keyword search, such as RF/Microwave Limiters
About Qorvo
Qorvo is a prominent American semiconductor company that specializes in the design and manufacturing of radio frequency (RF) solutions. The company was formed in 2015 through the merger of TriQuint Semiconductor and RF Micro Devices. Qorvo's product portfolio encompasses a wide range of RF components and semiconductor technologies used in various applications, including wireless communications, aerospace and defense, and IoT (Internet of Things) devices.
