3D Models
Note! To download footprints and symbols, use the build and request forms below
Request (48 hours)
- Datasheet Download Datasheet
- Stock & Prices $ Price & Stock for TGL4201-10
- Part Number TGL4201-10
- Manufacturer Qorvo
- Pin Count 6
- Part Category Integrated Circuit
- Last Modified Date May 1, 2025 4:26 AM UTC
- Pinout / Pin List Click Here (Member Only)
TGL4201-10 Details
-
Manufacturer Part Number:
TGL4201-10
-
Rohs Code:
Yes
-
Part Life Cycle Code:
Active
-
Package Description:
0.020 X 0.020 INCH, 0.004 INCH HEIGHT, DIE-6
-
ECCN Code:
EAR99
-
Manufacturer:
Qorvo
-
YTEOL:
8
-
Attenuation-Nom:
10 dB
-
Construction:
COMPONENT
-
Input Power-Max (CW):
20 dBm
-
Operating Frequency-Max:
40000 MHz
TGL4201-10 Frequently Asked Questions (FAQs)
-
A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the edge of the board to minimize radiation. A via-stitched ground plane under the device is also recommended to reduce radiation and improve thermal performance.
-
The optimal bias point for maximum efficiency is typically around 3.5V to 4.5V for Vd and 1.2V to 1.5V for Vg. However, the optimal bias point may vary depending on the specific application and operating conditions. It is recommended to perform load-pull characterization to determine the optimal bias point for maximum efficiency.
-
The maximum safe operating temperature for the TGL4201-10 is 150°C. However, it is recommended to operate the device at a temperature below 125°C to ensure reliable operation and to prevent thermal runaway.
-
Thermal runaway can be prevented by ensuring good thermal design, such as using a heat sink, thermal interface material, and a thermal management system. It is also recommended to monitor the device temperature and reduce the power output if the temperature exceeds a certain threshold.
-
The recommended input and output matching network for the TGL4201-10 depends on the specific application and operating frequency. However, a general guideline is to use a low-pass filter topology for the input matching network and a band-pass filter topology for the output matching network. The specific component values and topology should be optimized through simulation and measurement.
Trust Checks
Trust Score Unavailable
TGL4201-10 Overview
Use the download button to access the TGL4201-10 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like TGL42,
or try a keyword search, such as RF/Microwave Attenuators
About Qorvo
Qorvo is a prominent American semiconductor company that specializes in the design and manufacturing of radio frequency (RF) solutions. The company was formed in 2015 through the merger of TriQuint Semiconductor and RF Micro Devices. Qorvo's product portfolio encompasses a wide range of RF components and semiconductor technologies used in various applications, including wireless communications, aerospace and defense, and IoT (Internet of Things) devices.
