Description:AMP, VOLT CONTROLLED, PRETRIM, 2180; IC Function:Voltage Controlled Amplifier; Supply Voltage Min:-18V; Supply Voltage Max:18V; IC Package Type:SIP; No. of Pins:8Pins; Operating Temperature Min:0°C; Operating Temperature
A good PCB layout for the THAT2180CL08-U involves keeping the input and output traces short and symmetrical, using a solid ground plane, and placing decoupling capacitors close to the device. A 4-layer PCB with a dedicated ground plane is recommended.
To ensure proper biasing, connect the VCC pin to a stable 5V power supply, and the VEE pin to a stable -5V power supply. The ISET pin should be connected to a 10kΩ resistor to set the idle current. The VREF pin should be connected to a stable 2.5V reference voltage.
The maximum power dissipation of the THAT2180CL08-U is 1.4W. It is essential to ensure that the device is properly heat-sinked to prevent overheating, especially in high-temperature environments.
While the THAT2180CL08-U is typically used in dual-supply configurations, it can be used in a single-supply configuration with some limitations. However, this may affect the device's performance, and additional circuitry may be required to achieve the desired output voltage swing.
To troubleshoot common issues with the THAT2180CL08-U, start by checking the power supply voltages and ensuring that the device is properly biased. Check for any signs of oscillation or instability, and verify that the input and output impedances are properly matched. If issues persist, consult the datasheet and application notes for guidance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
THAT2180CL08-U Overview
Use the download button to access the THAT2180CL08-U 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like THAT2,
or try a keyword search, such as Other Amplifiers
