The maximum collector current that the TIP122 can handle is 5A, but it's recommended to keep it below 3A for reliable operation.
The base resistor value can be calculated using the formula Rb = (Vcc - Vbe) / (Ic / hFE), where Vcc is the supply voltage, Vbe is the base-emitter voltage, Ic is the collector current, and hFE is the current gain.
The TIP122 can be used as both a switch and an amplifier, but it's more commonly used as a switch due to its high current gain and low saturation voltage.
The maximum voltage that the TIP122 can handle is 100V, but it's recommended to keep it below 80V for reliable operation.
To protect the TIP122 from overheating, ensure good heat sinking, use a heat sink with a thermal resistance of less than 10°C/W, and keep the junction temperature below 150°C.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TIP122 Overview
Use the download button to access the TIP122 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TIP12,
or try a keyword search, such as Power Bipolar Transistors
Suggested Parts
If you searched for TIP122, you might also be interested in these parts: