Part Image

TL064ID - STMicroelectronics

Description: Low power JFET quad operational amplifier

Download TL064ID Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
TL064ID - STMicroelectronics PCB footprint - Small Outline Packages - Small Outline Packages - SO-14
click to zoom
3D Models
TL064ID - STMicroelectronics  - 3D model - Small Outline Packages - SO-14
click to zoom

TL064ID Details

  • Manufacturer Part Number:

    TL064ID

  • Brand Name:

    STMicroelectronics

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Package Description:

    MICRO, PLASTIC, SO-14

  • Pin Count:

    14

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    STMicroelectronics

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.02 µA

  • Bias Current-Max (IIB) @25C:

    0.0002 µA

  • Common-mode Reject Ratio-Min:

    80 dB

  • Common-mode Reject Ratio-Nom:

    86 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    9000 µV

  • JESD-30 Code:

    R-PDSO-G14

  • JESD-609 Code:

    e4

  • Length:

    8.65 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -18 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Functions:

    14

  • Number of Terminals:

    4

  • Operating Temperature-Max:

    105 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP14,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Packing Method:

    TUBE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Min:

    1.5 V/us

  • Slew Rate-Nom:

    3.5 V/us

  • Supply Current-Max:

    1 mA

  • Supply Voltage Limit-Max:

    18 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    NICKEL PALLADIUM GOLD

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    40

  • Unity Gain BW-Nom:

    1000

  • Voltage Gain-Min:

    4000

  • Wideband:

    NO

  • Width:

    3.9 mm

TL064ID Frequently Asked Questions (FAQs)

  • The maximum power dissipation of the TL064ID is dependent on the package type and ambient temperature. For the DIP14 package, the maximum power dissipation is 500mW at 25°C. For the SO14 package, it is 450mW at 25°C. It is essential to ensure that the device does not exceed these limits to prevent overheating and damage.
  • While the TL064ID is an op-amp, it can be used as a comparator in certain applications. However, it is not recommended as a dedicated comparator due to its limited slew rate and bandwidth. The TL064ID is better suited for amplifying small signals and providing high gain, rather than making precise comparisons.
  • To ensure stability when using the TL064ID in a feedback loop, it is essential to follow proper compensation techniques, such as adding a capacitor in parallel with the feedback resistor to reduce the gain at high frequencies. Additionally, the feedback loop should be designed to have a sufficient phase margin to prevent oscillations.
  • The input impedance of the TL064ID is typically around 2MΩ, but it can vary depending on the specific application and operating conditions. It is essential to consider the input impedance when designing the input stage of the circuit to ensure proper signal transfer and minimal signal loss.
  • The TL064ID is rated for operation up to 125°C, but its performance may degrade at higher temperatures. It is essential to consider the operating temperature range and ensure that the device is properly heat-sinked to prevent overheating and damage.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TL064ID Overview

Use the download button to access the TL064ID schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TL064, or try a keyword search, such as Operational Amplifiers

About STMicroelectronics

STMicroelectronics (ST) is a global semiconductor company that designs, manufactures, and markets a broad range of integrated circuits (ICs), discrete devices, and other electronic components. STMicroelectronics offers a diverse portfolio of semiconductor products covering a wide range of applications and industries. Their product categories include microcontrollers, analog and mixed-signal ICs, MEMS (Micro-Electro-Mechanical Systems) sensors, power management ICs, RF (Radio Frequency) transceivers, aut

Parts related to TL064ID

Showing 0 results

TL064ID Alternates

Showing results

Image Part Number Model
Part Image TL064IDT STMicroelectronics

Operational Amplifier, 14 Func, 9000uV Offset-Max, BIPolar, PDSO4