Please enter a minimum 3 letters or numbers
Technical Content
Part Image

TLE4266G - Infineon

Description: LDO Voltage Regulators LOW DROPOUT REGULATOR

Download TLE4266G Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
TLE4266G - Infineon - PCB symbol
click to zoom
PCB Footprints
TLE4266G - Infineon PCB footprint - SOT223 (3-Pin) - SOT223 (3-Pin) - sot23
click to zoom
3D Models
TLE4266G - Infineon - 3D model - SOT223 (3-Pin) - sot23
click to zoom

TLE4266G Details

  • Manufacturer Part Number:

    TLE4266G

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOT-223

  • Package Description:

    SOT-223, 4 PIN

  • Pin Count:

    4

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Austria, Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Manufacturer:

    Infineon Technologies AG

  • YTEOL:

    0

  • Adjustability:

    FIXED

  • Dropout Voltage1-Max:

    0.5 V

  • Dropout Voltage1-Nom:

    0.25 V

  • Input Voltage Absolute-Max:

    45 V

  • Input Voltage-Max:

    45 V

  • Input Voltage-Min:

    5.5 V

  • JESD-30 Code:

    R-PDSO-G4

  • JESD-609 Code:

    e3

  • Length:

    6.5 mm

  • Line Regulation-Max:

    0.03%

  • Load Regulation-Max:

    0.04%

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Outputs:

    1

  • Number of Terminals:

    4

  • Operating Temperature TJ-Max:

    150 °C

  • Operating Temperature TJ-Min:

    -40 °C

  • Output Current1-Max:

    0.12 A

  • Output Voltage1-Max:

    5.1 V

  • Output Voltage1-Min:

    4.9 V

  • Output Voltage1-Nom:

    5 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOT-223

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Regulator Type:

    FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR

  • Screening Level:

    AEC-Q100

  • Seated Height-Max:

    1.8 mm

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Terminal Finish:

    Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    2.3 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    NOT SPECIFIED

  • Voltage Tolerance-Max:

    2%

  • Width:

    3.5 mm

TLE4266G Frequently Asked Questions (FAQs)

  • A good PCB layout for the TLE4266G involves keeping the input and output tracks as short as possible, using a solid ground plane, and placing the decoupling capacitors close to the device. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • The input capacitor should be chosen based on the input voltage, output voltage, and the desired output ripple. A general rule of thumb is to use a capacitor with a value between 1uF to 10uF, with a voltage rating of at least 1.5 times the input voltage. X5R or X7R ceramic capacitors are recommended due to their low ESR and high reliability.
  • The TLE4266G is specified to operate from -40°C to 150°C, but the maximum ambient temperature range depends on the specific application and the power dissipation of the device. In general, it's recommended to keep the ambient temperature below 125°C to ensure reliable operation.
  • The power dissipation of the TLE4266G can be calculated using the formula: Pd = (Vin - Vout) x Iout x η, where Vin is the input voltage, Vout is the output voltage, Iout is the output current, and η is the efficiency of the device. The efficiency can be obtained from the datasheet or by measuring the input and output power.
  • The output capacitor should be chosen based on the output voltage, output current, and the desired output ripple. A general rule of thumb is to use a capacitor with a value between 1uF to 10uF, with a voltage rating of at least 1.5 times the output voltage. Low-ESR capacitors such as ceramic or polymer capacitors are recommended.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TLE4266G Overview

Use the download button to access the TLE4266G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TLE42, or try a keyword search, such as Linear Regulator ICs

Parts related to TLE4266G

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑