Please enter a minimum 3 letters or numbers
Technical Content
Part Image

TLE4964-1M - Infineon

Description: Infineon TLE4964-1M, Unipolar Hall Effect Sensor Switch 3-Pin PG-SOT-2-3, 3 → 32 V

Download TLE4964-1M Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
TLE4964-1M - Infineon - PCB symbol
click to zoom
PCB Footprints
TLE4964-1M - Infineon PCB footprint - SOT23 (3-Pin) - SOT23 (3-Pin) - SOT23-3-15
click to zoom
3D Models
TLE4964-1M - Infineon - 3D model - SOT23 (3-Pin) - SOT23-3-15
click to zoom

TLE4964-1M Details

  • Manufacturer Part Number:

    TLE4964-1M

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Manufacturer:

    Infineon Technologies AG

  • YTEOL:

    14

  • Additional Feature:

    REVERSE POLARITY PROTECTION, OPEN DRAIN OUTPUT

  • Body Breadth:

    1.3 mm

  • Body Height:

    1 mm

  • Body Length or Diameter:

    2.9 mm

  • Housing:

    PLASTIC

  • Hysteresis:

    5.5 mT

  • Input Mode:

    UNIPOLAR

  • JESD-609 Code:

    e3

  • Magnetic Field Range-Max:

    23.5 mT

  • Magnetic Field Range-Min:

    8.4 mT

  • Mounting Feature:

    SURFACE MOUNT

  • Number of Terminals:

    3

  • Operating Current-Max:

    2.5 mA

  • Operating Temperature-Max:

    170 °C

  • Operating Temperature-Min:

    -40 °C

  • Output:

    OPEN-DRAIN

  • Output Circuit Type:

    TRANSISTOR

  • Output Current-Max:

    25 mA

  • Output Range:

    0-25mA

  • Output Type:

    ANALOG CURRENT

  • Package Equivalence Code:

    TO-236

  • Package Shape/Style:

    RECTANGULAR

  • Screening Level:

    AEC-Q100

  • Sensors/Transducers Type:

    MAGNETIC FIELD SENSOR,HALL EFFECT

  • Supply Voltage-Max:

    32 V

  • Supply Voltage-Min:

    3 V

  • Surface Mount:

    YES

  • Terminal Finish:

    Tin (Sn)

  • Termination Type:

    SOLDER

TLE4964-1M Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the sensitive analog circuitry away from the digital circuitry and ensure a low-impedance path for the power supply.
  • Use a heat sink with a thermal conductivity of at least 1 W/mK and ensure a good thermal interface between the device and the heat sink. Keep the ambient temperature below 125°C and avoid hot spots on the PCB.
  • Use a pi-filter (L-C-R) or a T-filter (L-C-L) configuration with a cutoff frequency of around 100 kHz to 1 MHz to filter out high-frequency noise and ensure a stable input voltage.
  • Use a shielded enclosure, keep the PCB away from the enclosure walls, and use a common-mode choke or a ferrite bead to filter out electromagnetic interference (EMI). Ensure that the device is properly decoupled and use a low-pass filter on the output.
  • Power up the device in the following sequence: VCC, VDD, and then the input voltage. Ensure a monotonic power-up sequence to avoid latch-up or damage to the device.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TLE4964-1M Overview

Use the download button to access the TLE4964-1M schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TLE49, or try a keyword search, such as Magnetic Field Sensors

Parts related to TLE4964-1M

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑