Please enter a minimum 3 letters or numbers
Technical Content
Part Image

TLE49644MXTSA1 - Infineon

Description: Board Mount Hall Effect / Magnetic Sensors POSITION SENSORS

Download TLE49644MXTSA1 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
TLE49644MXTSA1 - Infineon - PCB symbol
click to zoom
PCB Footprints
TLE49644MXTSA1 - Infineon PCB footprint - SOT23 (3-Pin) - SOT23 (3-Pin) - PG-SOT23-3-15
click to zoom
3D Models
TLE49644MXTSA1 - Infineon - 3D model - SOT23 (3-Pin) - PG-SOT23-3-15
click to zoom

TLE49644MXTSA1 Details

  • Manufacturer Part Number:

    TLE49644MXTSA1

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SOT-23, 3 PIN

  • Manufacturer:

    Infineon Technologies AG

  • YTEOL:

    6

  • Additional Feature:

    REVERSE POLARITY PROTECTION

  • Body Breadth:

    1.3 mm

  • Body Height:

    1 mm

  • Body Length or Diameter:

    2.9 mm

  • Housing:

    PLASTIC

  • Hysteresis:

    1.5 mT

  • Input Mode:

    UNIPOLAR

  • JESD-609 Code:

    e3

  • Magnetic Field Range-Max:

    13.5 mT

  • Magnetic Field Range-Min:

    5.4 mT

  • Mounting Feature:

    SURFACE MOUNT

  • Number of Terminals:

    3

  • Operating Current-Max:

    2.5 mA

  • Operating Temperature-Max:

    170 °C

  • Operating Temperature-Min:

    -40 °C

  • Output:

    OPEN-DRAIN

  • Output Circuit Type:

    OPEN-DRAIN

  • Output Current-Max:

    25 mA

  • Output Range:

    0-25mA

  • Output Type:

    CURRENT OUTPUT

  • Package Equivalence Code:

    TO-236

  • Package Shape/Style:

    RECTANGULAR

  • Screening Level:

    AEC-Q100

  • Sensors/Transducers Type:

    MAGNETIC FIELD SENSOR,HALL EFFECT

  • Supply Voltage-Max:

    32 V

  • Supply Voltage-Min:

    3 V

  • Surface Mount:

    YES

  • Terminal Finish:

    Tin (Sn)

  • Termination Type:

    SOLDER

TLE49644MXTSA1 Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital grounds separate and connect them at a single point. Use a decoupling capacitor (e.g., 100nF) close to the device.
  • Use a shielded cable for the sensor connections, and ensure the PCB is designed with EMC in mind (e.g., minimize loop areas, use a common mode choke). Follow the recommended layout and grounding scheme.
  • The device is specified to operate from -40°C to 150°C (junction temperature). However, the maximum operating temperature range for a specific application may be limited by the system's thermal design and cooling capabilities.
  • Calibration is not required for the TLE49644MXTSA1, as it is a digital sensor with internal calibration. However, the device may require offset and sensitivity adjustments depending on the specific application and system requirements.
  • Power up the device in the following sequence: VCC, then VDD, and finally the clock signal. Ensure that the power supplies are stable and within the recommended voltage range before applying the clock signal.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TLE49644MXTSA1 Overview

Use the download button to access the TLE49644MXTSA1 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TLE49, or try a keyword search, such as Magnetic Field Sensors

Parts related to TLE49644MXTSA1

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑