Please enter a minimum 3 letters or numbers
Technical Content
Part Image

TLP3230(TP15,F) - Toshiba

Description: Toshiba TLP3230(TP15,F) DC Input MOSFET Output Optocoupler, Surface Mount, 4-Pin SSOP

Download TLP3230(TP15,F) Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
TLP3230(TP15,F) - Toshiba - PCB symbol
click to zoom
PCB Footprints
TLP3230(TP15,F) - Toshiba PCB footprint - SO Transistor Flat Lead - SO Transistor Flat Lead - 11-2B1
click to zoom
3D Models
TLP3230(TP15,F) - Toshiba - 3D model - SO Transistor Flat Lead - 11-2B1
click to zoom

TLP3230(TP15,F) Details

  • Manufacturer Part Number:

    TLP3230(TP15,F)

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Not Recommended

  • Package Description:

    SSOP-4

  • HTS Code:

    8541.40.95.00

  • Manufacturer:

    Toshiba America Electronic Components

  • YTEOL:

    3

  • Configuration:

    SINGLE WITH BUILT-IN DIODE

  • Control Current:

    0.03 A

  • Control Voltage:

    1 V

  • Forward Current-Max:

    0.03 A

  • Input Type:

    DC

  • Isolation Voltage-Max:

    1500 V

  • On-State Current-Max:

    0.16 A

  • On-state Resistance-Max:

    8 Ω

  • Operating Temperature-Max:

    65 °C

  • Operating Temperature-Min:

    -20 °C

  • Output Circuit Type:

    MOSFET

  • Overall Height:

    1.8 mm

  • Overall Length:

    3.65 mm

TLP3230(TP15,F) Frequently Asked Questions (FAQs)

  • Toshiba recommends a PCB layout with a solid ground plane, short traces, and minimal inductance to ensure optimal performance and minimize electromagnetic interference (EMI). A 4-layer PCB with a dedicated ground plane is recommended.
  • The TLP3230 requires a bias voltage of 3.3V to 5V on the VCC pin, and the input signal should be AC-coupled to the IN pin. A 0.1uF decoupling capacitor is recommended between VCC and GND to reduce noise and ensure stable operation.
  • The maximum allowable input signal amplitude for the TLP3230 is ±5V, exceeding which may cause damage to the device. It is recommended to limit the input signal amplitude to ±3V for reliable operation.
  • When the TLP3230's output is not in use, it is recommended to connect the OUT pin to a high-impedance state (e.g., a 1kΩ pull-up resistor to VCC) to prevent unwanted signal propagation and reduce power consumption.
  • The recommended operating temperature range for the TLP3230 is -40°C to +85°C. Operating the device outside this range may affect its performance and reliability.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TLP3230(TP15,F) Overview

Use the download button to access the TLP3230(TP15,F) schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TLP32, or try a keyword search, such as Solid State Relays

Parts related to TLP3230(TP15,F)

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑