Please enter a minimum 3 letters or numbers
Technical Content
Part Image

TLP4176G - Toshiba

Description: 1b, 350 V/0.12 A Photorelay, 1500 Vrms, 2.54SOP4

Download TLP4176G Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
TLP4176G - Toshiba - PCB symbol
click to zoom
PCB Footprints
TLP4176G - Toshiba PCB footprint - Other - Other - 11-5H1S
click to zoom
3D Models
TLP4176G - Toshiba - 3D model - Other - 11-5H1S
click to zoom

TLP4176G Details

  • Manufacturer Part Number:

    TLP4176G

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SOP-4

  • Country Of Origin:

    Japan

  • HTS Code:

    8541.40.95.00

  • Manufacturer:

    Toshiba America Electronic Components

  • YTEOL:

    7

  • Additional Feature:

    UL RECOGNIZED

  • Configuration:

    SINGLE WITH BUILT-IN DIODE

  • Control Current:

    0.005 A

  • Control Voltage:

    1 V

  • Forward Current-Max:

    0.025 A

  • Input Type:

    DC

  • Isolation Voltage-Max:

    1500 V

  • Mounting Feature:

    SURFACE MOUNT

  • Number of Elements:

    1

  • On-state Resistance-Max:

    25 Ω

  • Operating Temperature-Max:

    65 °C

  • Operating Temperature-Min:

    -20 °C

  • Optoelectronic Device Type:

    TRANSISTOR OUTPUT SSR

  • Output Circuit Type:

    MOSFET

  • Overall Height:

    2.1 mm

  • Overall Length:

    4.4 mm

  • Surface Mount:

    YES

TLP4176G Frequently Asked Questions (FAQs)

  • Toshiba recommends a PCB layout with a solid ground plane, short traces, and minimal vias to reduce noise and parasitic inductance. A 4-layer PCB with a dedicated power plane and a separate ground plane is recommended.
  • The TLP4176G requires a bias voltage of 5V ± 10% on the VCC pin, and a bias current of 10mA to 20mA on the VREF pin. Ensure that the bias voltage and current are stable and within the recommended range for optimal performance.
  • The maximum allowable power dissipation of the TLP4176G is 1.5W. Ensure that the device is properly heat-sinked and that the ambient temperature is within the recommended range to prevent overheating.
  • Use ESD protection devices such as TVS diodes or ESD arrays on the input and output pins of the TLP4176G. Additionally, use overvoltage protection devices such as voltage regulators or overvoltage protection ICs to prevent damage from voltage spikes or surges.
  • The recommended operating frequency range of the TLP4176G is up to 100 kHz. However, the device can operate at higher frequencies with reduced performance and increased power consumption.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TLP4176G Overview

Use the download button to access the TLP4176G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TLP41, or try a keyword search, such as Solid State Relays

Parts related to TLP4176G

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑