Description:◼ VIN Voltage: Support 2.5-V, 3.3-V and 5-V Power Rails
◼ VLDOIN Voltage Range: 1.1 V to 3.5 V
◼ Flexible Input Voltage Tracking Directly from REFIN or
Through External Resistor Divider
◼ 3-A Sink and Source Current Capability for DDR
Termination
◼ Integrated Power MOSFETs
◼ Output Remote Sensing
◼ Fast Load-Transient Response
◼ Open-Drain Power Good to Monitor OUT Regulation
◼ Built in Soft-Start and UVLO, Current Limit and Thermal
Shutdown Protection
◼ Support DDR, DDR2, DDR3, DDR3L, Low Power
The recommended PCB layout for optimal thermal performance involves placing the device on a 2-layer or 4-layer board with a solid ground plane on the bottom layer. This helps to dissipate heat efficiently. Additionally, it's recommended to use thermal vias under the device to connect the top and bottom layers, and to keep the surrounding area clear of other components to ensure good airflow.
To ensure reliable operation in high-vibration environments, it's recommended to use a secure mounting method, such as screwing the device to the PCB or using a vibration-dampening material like silicone adhesive. Additionally, consider using a conformal coating to protect the device from moisture and contaminants.
Although the datasheet specifies a recommended operating voltage range of 3.3V to 5V, the absolute maximum rating for the VDD pin is 6V. However, it's recommended to operate the device within the specified range to ensure reliable operation and to prevent damage.
Yes, the TPL51200-DF8R can be used in battery-powered devices. However, it's essential to consider the device's power consumption and to implement power-saving strategies, such as using the device's low-power mode or implementing a power-gating scheme, to minimize battery drain.
To troubleshoot issues with the device's I2C interface, start by verifying the I2C bus voltage and frequency. Check the device's address and ensure that it matches the address used in the firmware. Use an oscilloscope or logic analyzer to inspect the I2C bus signals and verify that the device is responding to commands. Consult the datasheet and application notes for additional troubleshooting guidance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TPL51200-DF8R Overview
Use the download button to access the TPL51200-DF8R schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TPL51,
or try a keyword search, such as Other Regulators
