The recommended PCB layout for the TPSMD40CA includes a solid ground plane, short and wide traces for the high-current paths, and a Kelvin connection for the sense pins. Additionally, it's recommended to place the device close to the power source and use a common ground point for the device and the power source.
To ensure proper soldering, use a soldering iron with a temperature of 260°C to 280°C, and apply a solder paste with a melting point of 217°C to 221°C. The recommended soldering time is 3-5 seconds per pin, and the device should be handled by the package body, not the leads, to prevent damage.
The TPSMD40CA has a maximum surge current rating of 40A, 8/20μs waveform, as per IEC 61000-4-5. This rating is higher than the maximum current rating of 20A, which is the continuous current rating.
The TPSMD40CA has a maximum operating temperature of 150°C, but it's recommended to derate the current rating at higher temperatures. For example, at 125°C, the maximum current rating is 15A, and at 150°C, it's 10A. Consult the datasheet for the complete derating curve.
The TPSMD40CA has a built-in overvoltage protection (OVP) circuit that clamps the voltage to a safe level during overvoltage conditions. The OVP threshold is typically 35V, and the device will reset once the voltage returns to a safe level.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TPSMD40CA Overview
Use the download button to access the TPSMD40CA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TPSMD,
or try a keyword search, such as Transient Suppressors
