The recommended PCB layout for the TPSMD60A includes a solid ground plane, short and wide traces for the high-current paths, and a Kelvin connection for the sense pins. Additionally, it's recommended to place the device close to the power source and use a common ground point for the sense pins and the ground pin.
To select the correct fuse rating, you need to consider the maximum expected current, the voltage rating, and the fault current of your application. You should also consider the ambient temperature, the fuse's melting I²t, and the desired tripping time. Littelfuse provides a fuse selection guide that can help you choose the right fuse for your application.
The maximum allowable voltage drop across the TPSMD60A is not explicitly stated in the datasheet, but it's typically recommended to keep the voltage drop below 1V to ensure reliable operation. However, the actual voltage drop will depend on the current flowing through the device and the ambient temperature.
The TPSMD60A is rated for operation up to 150°C, but its performance may degrade at high temperatures. It's recommended to derate the fuse's current rating and consider the temperature coefficient of the device when operating in high-temperature environments.
To ensure proper soldering, follow the recommended soldering profile and use a solder with a high melting point. Apply a small amount of solder to the pads and use a soldering iron with a temperature of around 250°C. Avoid applying excessive heat or pressure, which can damage the device.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
TPSMD60A Overview
Use the download button to access the TPSMD60A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TPSMD,
or try a keyword search, such as Transient Suppressors
