Please enter a minimum 3 letters or numbers
Technical Content
Part Image

TQP7M9105 - Qorvo

Description: RF Amplifier 50-1500MHz 1W 5V P1dB 30dBm @ 940MHz

Download TQP7M9105 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
TQP7M9105 - Qorvo - PCB symbol
click to zoom
PCB Footprints
TQP7M9105 - Qorvo PCB footprint - Other - Other - TQP7M9105-2
click to zoom
3D Models
TQP7M9105 - Qorvo - 3D model - Other - TQP7M9105-2
click to zoom

TQP7M9105 Details

  • Manufacturer Part Number:

    TQP7M9105

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • ECCN Code:

    5A991.B

  • Manufacturer:

    Qorvo

  • YTEOL:

    0

  • Characteristic Impedance:

    50 Ω

  • Construction:

    COMPONENT

  • Gain:

    19.4 dB

  • Input Power-Max (CW):

    30 dBm

  • JESD-609 Code:

    e4

  • Operating Frequency-Max:

    1500 MHz

  • Operating Frequency-Min:

    50 MHz

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • RF/Microwave Device Type:

    WIDE BAND MEDIUM POWER

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

TQP7M9105 Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the RF traces short and away from the digital lines. Use a 50-ohm microstrip line for the RF output.
  • Use a voltage regulator to set the VCC voltage to 3.3V. Adjust the bias resistors (Rbias) to set the desired current. Monitor the current and adjust the bias resistors accordingly.
  • Use a pi-network or a T-network for input matching, and a series LC circuit for output matching. The values of the components will depend on the specific application and frequency of operation.
  • Use a low-noise amplifier (LNA) before the TQP7M9105 to reduce the noise figure. Optimize the input matching network to minimize noise. Use a high-Q inductor in the output matching network to reduce noise.
  • The maximum power handling of the TQP7M9105 is 30 dBm. However, the actual power handling will depend on the specific application and the thermal management of the device.

Trust Checks

This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TQP7M9105 Overview

Use the download button to access the TQP7M9105 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TQP7M, or try a keyword search, such as RF/Microwave Amplifiers

About Qorvo

Qorvo is a prominent American semiconductor company that specializes in the design and manufacturing of radio frequency (RF) solutions. The company was formed in 2015 through the merger of TriQuint Semiconductor and RF Micro Devices. Qorvo's product portfolio encompasses a wide range of RF components and semiconductor technologies used in various applications, including wireless communications, aerospace and defense, and IoT (Internet of Things) devices.

Parts related to TQP7M9105

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑