A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the RF traces as short as possible and use 50-ohm microstrip lines. Avoid vias and thermal pads under the device.
Use the lowest possible supply voltage (1.8V) and reduce the operating frequency to minimize power consumption. Disable the internal voltage regulator if an external regulator is used. Use the power-down mode when the device is not in use.
Use a pi-network or a T-network for input and output matching. The values of the components depend on the specific application and frequency band. Consult the application note or a qualified RF engineer for design assistance.
Use a TVS diode or a transient voltage suppressor at the input and output pins to protect against ESD. Ensure the PCB layout and component selection meet the required EMI standards. Consult the application note or a qualified RF engineer for design assistance.
Use a thermal pad or a heat sink to dissipate heat. Ensure good thermal conductivity between the device and the thermal pad or heat sink. Consult the application note or a qualified thermal engineer for design assistance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
TQP9111 Overview
Use the download button to access the TQP9111 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like TQP91,
or try a keyword search, such as RF/Microwave Amplifiers
About Qorvo
Qorvo is a prominent American semiconductor company that specializes in the design and manufacturing of radio frequency (RF) solutions. The company was formed in 2015 through the merger of TriQuint Semiconductor and RF Micro Devices. Qorvo's product portfolio encompasses a wide range of RF components and semiconductor technologies used in various applications, including wireless communications, aerospace and defense, and IoT (Internet of Things) devices.
