Part Image

TSL25721FN - ams OSRAM

Description: SENSOR OPT 850NM AMBIENT 6 WDFN

Download TSL25721FN Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
TSL25721FN - ams OSRAM PCB footprint - Other - Other - FN
click to zoom
3D Models
TSL25721FN - ams OSRAM  - 3D model - Other - FN
click to zoom

TSL25721FN Details

  • Manufacturer Part Number:

    TSL25721FN

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Country Of Origin:

    Thailand

  • HTS Code:

    8542.39.00.01

  • Factory Lead Time:

    12 Weeks

  • Manufacturer:

    ams OSRAM Group

  • Analog IC - Other Type:

    ANALOG CIRCUIT

  • JESD-609 Code:

    e4

  • Moisture Sensitivity Level:

    3

  • Peak Reflow Temperature (Cel):

    260

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Time@Peak Reflow Temperature-Max (s):

    10

TSL25721FN Frequently Asked Questions (FAQs)

  • The recommended PCB layout for the TSL25721FN involves placing the sensor near the edge of the PCB, with the photodiode facing upwards. A ground plane underneath the sensor can help reduce noise. A 0.1uF decoupling capacitor between VCC and GND is also recommended.
  • The TSL25721FN outputs 16-bit data in two's complement format. The output data should be shifted right by 4 bits to convert it to lux. The sensor also has a built-in gain setting, which can be adjusted to optimize the output data for the specific application.
  • The recommended operating voltage for the TSL25721FN is between 2.5V and 3.5V. Operating the sensor outside of this range may affect its accuracy and reliability.
  • The TSL25721FN does not require calibration. It is a calibrated sensor, and the output data is directly proportional to the ambient light intensity. However, the sensor's output may need to be adjusted based on the specific application and environment.
  • The response time of the TSL25721FN is approximately 100ms. This means that the sensor takes around 100ms to respond to changes in ambient light intensity.

Trust Checks

This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

TSL25721FN Overview

Use the download button to access the TSL25721FN schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like TSL25, or try a keyword search, such as Other Signal Circuits

Parts related to TSL25721FN

Showing 0 results