TSL27713FN footprint, schematic symbol and 3D model by ams OSRAM

Symbol

PCB Footprints

3D Models

TSL27713FN Details

The recommended PCB layout for the TSL27713FN involves placing the sensor near the edge of the PCB, with the photodiodes facing away from the PCB to minimize interference from the PCB itself. Additionally, it's recommended to use a ground plane under the sensor to reduce noise and ensure accurate readings.
To handle noise and interference in the TSL27713FN output, it's recommended to use a low-pass filter, such as a RC filter, to filter out high-frequency noise. Additionally, using a shielded cable and placing the sensor away from sources of electromagnetic interference (EMI) can also help reduce noise and interference.
The recommended operating temperature range for the TSL27713FN is -40°C to 85°C. However, it's recommended to operate the sensor within a narrower temperature range of 0°C to 60°C for optimal performance and accuracy.
Calibrating the TSL27713FN involves adjusting the gain and offset values to match the specific application and environment. This can be done by taking readings at different lux levels and adjusting the gain and offset values accordingly. It's also recommended to use a lux meter as a reference to ensure accurate readings.
The maximum sampling rate for the TSL27713FN is 120 samples per second (sps). However, the recommended sampling rate is 50 sps to 100 sps for most applications, as higher sampling rates may not provide significant benefits and may increase power consumption.

Community Provided

System Verified

Community Approved

Use the download button to access the TSL27713FN schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like TSL27, or try a keyword search, such as Photo ICs

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →