TSOP77538TR footprint, schematic symbol and 3D model by Vishay

Symbol

PCB Footprints

3D Models

TSOP77538TR Details

The recommended PCB layout for the TSOP77538TR involves keeping the sensor away from high-frequency signals, using a ground plane under the sensor, and minimizing the distance between the sensor and the microcontroller. A 4-layer PCB with a dedicated ground plane is recommended.
The output signal from the TSOP77538TR is an analog signal that requires amplification and filtering to remove noise. A non-inverting amplifier with a gain of 10-20 can be used, followed by a low-pass filter with a cutoff frequency of around 100 Hz.
The recommended operating temperature range for the TSOP77538TR is -25°C to 85°C. However, the sensor can operate up to 100°C with reduced accuracy and lifespan.
The TSOP77538TR requires calibration to compensate for variations in the sensor and the ambient environment. A calibration procedure involving a known light source and a microcontroller can be used to determine the sensor's sensitivity and offset.
The TSOP77538TR can handle ambient light intensities up to 100,000 lux, making it suitable for outdoor applications. However, the sensor's accuracy may be affected at very high light intensities.

Expert Contribution

System Verified

Community Approved

Use the download button to access the TSOP77538TR schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like TSOP7, or try a keyword search, such as Photo ICs

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →