Part Image

UPC3403G2-A - Renesas Electronics

Description: µPC452, 3403 are high-performance version of the single-supply op-amp µPC451, 324. Class AB push-pull circuity is employed in the output stage to avoid crossover distortion, and the AC characteristics of this op-amp are also improved. In addition, this single-supply op-amp can operate in both positive and negative power supply and its common-mode input voltage range can also be used from the V-(GND) level. Therefore, this amplifier can be widely used in various application circuit including single-supply AC

Download UPC3403G2-A Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
UPC3403G2-A - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - SOP_14
click to zoom
3D Models
UPC3403G2-A - Renesas Electronics  - 3D model - Small Outline Packages - SOP_14
click to zoom

UPC3403G2-A Details

  • Manufacturer Part Number:

    UPC3403G2-A

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    End Of Life

  • Part Package Code:

    SOP

  • Package Description:

    SOP-14

  • Pin Count:

    14

  • Manufacturer Package Code:

    PRSP0014DI-A14

  • Country Of Origin:

    Thailand

  • ECCN Code:

    5A002

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.25 µA

  • Bias Current-Max (IIB) @25C:

    0.25 µA

  • Common-mode Reject Ratio-Min:

    70 dB

  • Common-mode Reject Ratio-Nom:

    90 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    7000 µV

  • JESD-30 Code:

    R-PDSO-G14

  • JESD-609 Code:

    e6

  • Length:

    10.2 mm

  • Low-Bias:

    NO

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Neg Supply Voltage Limit-Max:

    -18 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Functions:

    4

  • Number of Terminals:

    14

  • Operating Temperature-Max:

    80 °C

  • Operating Temperature-Min:

    -20 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP14,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.8 mm

  • Slew Rate-Nom:

    0.8 V/us

  • Supply Current-Max:

    7 mA

  • Supply Voltage Limit-Max:

    18 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    COMMERCIAL EXTENDED

  • Terminal Finish:

    Tin/Bismuth (Sn/Bi)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    10

  • Voltage Gain-Min:

    20000

  • Wideband:

    NO

  • Width:

    4.4 mm

UPC3403G2-A Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital grounds separate and connect them at a single point. Use a 10uF capacitor between VCC and GND, and a 100nF capacitor between AVCC and AGND.
  • Use a high-quality, low-noise power supply with a voltage regulator to ensure a stable 3.3V or 5V supply. Decouple the power pins with 10uF and 100nF capacitors. Ensure the power supply can provide the required current, which is typically 100mA for the UPC3403G2-A.
  • The maximum clock frequency for the UPC3403G2-A is 20MHz. However, the actual clock frequency may be limited by the specific application and the quality of the clock signal.
  • The UPC3403G2-A has a JTAG interface for debugging and programming. Use a JTAG adapter and a compatible software tool, such as Renesas' E1 emulator, to connect to the JTAG interface. Ensure the JTAG pins are not connected to other signals or loads.
  • The reset pin (RST) is an active-low input that resets the microcontroller when pulled low. It can be connected to a push-button or a reset IC. The reset pin should be pulled high through a resistor to ensure proper operation.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

UPC3403G2-A Overview

Use the download button to access the UPC3403G2-A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like UPC34, or try a keyword search, such as Operational Amplifiers

Parts related to UPC3403G2-A

Showing 0 results

UPC3403G2-A Alternates

Showing results

Image Part Number Model
Part Image UPC3403G2-E2-A Renesas Electronics Corporation

Operational Amplifier, 4 Func, 7000uV Offset-Max, BIPolar, PDSO14