Part Image

UPC824G2-E2-A - Renesas Electronics

Description: The μPC824 and 4074 are low noise versions operational amplifier of μPC804 and 4084 series with the general-purpose J-FET input. Compared with the μPC804 and 4084 series, various characteristics such as input referred noise, input offset voltage and input bias current have been improved. It is therefore ideal for application circuits such as preamplifiers and active filters for measurement, audio and measurement where low noise, high input impedance and high-speed characteristics are important. Depending on

Download UPC824G2-E2-A Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
UPC824G2-E2-A - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - PRSP0008DL-A/
click to zoom
3D Models
UPC824G2-E2-A - Renesas Electronics  - 3D model - Small Outline Packages - PRSP0008DL-A/
click to zoom

UPC824G2-E2-A Details

  • Manufacturer Part Number:

    UPC824G2-E2-A

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOP

  • Package Description:

    SOP-14

  • Pin Count:

    14

  • Manufacturer Package Code:

    PRSP0014DI-A14

  • Country Of Origin:

    Thailand

  • ECCN Code:

    5A002

  • HTS Code:

    8542.33.00.01

  • Factory Lead Time:

    24 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.007 µA

  • Bias Current-Max (IIB) @25C:

    0.0002 µA

  • Common-mode Reject Ratio-Min:

    70 dB

  • Common-mode Reject Ratio-Nom:

    90 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    10000 µV

  • JESD-30 Code:

    R-PDSO-G14

  • Length:

    10.2 mm

  • Low-Bias:

    NO

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Neg Supply Voltage Limit-Max:

    -18 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Functions:

    1

  • Number of Terminals:

    14

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP14,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUT LINE

  • Packing Method:

    TR, EMBOSSED

  • Power:

    NO

  • Programmable Power:

    NO

  • Seated Height-Max:

    1.8 mm

  • Slew Rate-Nom:

    13 V/us

  • Supply Current-Max:

    10 mA

  • Supply Voltage Limit-Max:

    18 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Unity Gain BW-Nom:

    3000

  • Voltage Gain-Min:

    25000

  • Wideband:

    NO

  • Width:

    4.4 mm

UPC824G2-E2-A Frequently Asked Questions (FAQs)

  • The recommended operating temperature range for the UPC824G2-E2-A is -40°C to +85°C, although it can operate up to +125°C for short periods of time.
  • The clock settings for the UPC824G2-E2-A can be configured using the Clock Generator Unit (CGU) registers. The CGU allows for selection of clock sources, division, and multiplication to generate the desired clock frequencies.
  • The maximum current consumption of the UPC824G2-E2-A depends on the operating frequency and voltage. At 5V and 20MHz, the maximum current consumption is approximately 25mA. However, this value can be reduced by using power-saving modes and optimizing the system design.
  • The UPC824G2-E2-A has a built-in watchdog timer (WDT) that can be enabled and configured using the WDT registers. The WDT can be set to reset the microcontroller if it does not receive a reset signal within a specified time period.
  • The ADC on the UPC824G2-E2-A has a 10-bit resolution and can operate at a maximum sampling rate of 500ksps. However, the ADC may not be suitable for high-precision applications due to its limited resolution and potential for noise and interference.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

UPC824G2-E2-A Overview

Use the download button to access the UPC824G2-E2-A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like UPC82, or try a keyword search, such as Operational Amplifiers

Parts related to UPC824G2-E2-A

Showing 0 results