Please enter a minimum 3 letters or numbers
Technical Content
Part Image

UPD720201K8-701-BAC-A - Renesas Electronics

Description: The µPD720201 is a USB host controller LSI compatible with the USB 3.0 and xHCI (eXtensible Host Controller Interface) 1.0 specifications. The system bus is compatible with the PCIe Gen2 specification. The controller provides four USB ports with LS (Low-Speed) / FS (Full-Speed) / HS (High-Speed) / SS (SuperSpeed) support.The µPD720201 comes in a 68-pin QFN package and has the following improvements over previous products. Reduced power consumption in low-power mode to 4.5mW, a reduction of 90% compared with

Download UPD720201K8-701-BAC-A Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
UPD720201K8-701-BAC-A - Renesas Electronics - PCB symbol
click to zoom
PCB Footprints
UPD720201K8-701-BAC-A - Renesas Electronics PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - 68-PIN QFN (8x8)
click to zoom
3D Models
UPD720201K8-701-BAC-A - Renesas Electronics - 3D model - Quad Flat No-Lead - 68-PIN QFN (8x8)
click to zoom

UPD720201K8-701-BAC-A Details

  • Manufacturer Part Number:

    UPD720201K8-701-BAC-A

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    QFN-68

  • Similar Group:

    CT00108822411008

  • Country Of Origin:

    Japan, Mainland China, South Korea, Taiwan

  • ECCN Code:

    3A991.a.2

  • HTS Code:

    8542.31.00.30

  • Factory Lead Time:

    12 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    8

  • Bus Compatibility:

    PCI; SPI; USB

  • Clock Frequency-Max:

    100 MHz

  • Data Transfer Rate-Max:

    625 MBps

  • JESD-30 Code:

    S-PQCC-N68

  • JESD-609 Code:

    e3

  • Length:

    8 mm

  • Number of Terminals:

    68

  • Operating Temperature-Max:

    85 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    QCCN

  • Package Equivalence Code:

    LCC68,.32SQ,16

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    0.9 mm

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    OTHER

  • Terminal Finish:

    Tin (Sn)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.4 mm

  • Terminal Position:

    QUAD

  • Width:

    8 mm

  • uPs/uCs/Peripheral ICs Type:

    BUS CONTROLLER, UNIVERSAL SERIAL BUS

UPD720201K8-701-BAC-A Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the center of the board, and the decoupling capacitors should be placed as close to the device as possible.
  • Ensure that the device is operated within the recommended temperature range (-40°C to 125°C). Use a heat sink or thermal pad to dissipate heat, and consider using a thermal interface material to improve heat transfer.
  • The input capacitor should be a low-ESR ceramic capacitor with a value of 10uF to 22uF. The output capacitor should be a low-ESR ceramic capacitor with a value of 10uF to 47uF. The capacitors should be placed as close to the device as possible.
  • Use an oscilloscope to monitor the input and output voltages, and check for any signs of voltage drops or noise. Verify that the device is properly soldered and that the PCB layout is correct. Check the input voltage and current ratings to ensure they are within the recommended specifications.
  • Yes, the UPD720201K8-701-BAC-A can be used in a redundant or parallel configuration to increase the power output. However, ensure that the devices are properly synchronized and that the output voltages are matched to prevent current imbalances.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

UPD720201K8-701-BAC-A Overview

Use the download button to access the UPD720201K8-701-BAC-A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like UPD72, or try a keyword search, such as Bus Controllers

Suggested Parts

If you searched for UPD720201K8-701-BAC-A, you might also be interested in these parts:
Part Number
0539160208
BC501SM
BC501SM-TR
LTC3621IDCB-3.3#TRMPBF
USB1086-GF-B
2199119-3
UPD720201K8-711-BAC-A
51338-1074
M20-9980446

Parts related to UPD720201K8-701-BAC-A

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑