Description:The 78K0/Kx2-A Group is supported only for customers who have already adopted these products. The RL78/I1D Group is recommended for new designs.
The recommended oscillator crystal frequency for the UPD78F0552MA-FAA-AX is 12 MHz, as specified in the datasheet. However, it's essential to note that the actual frequency may vary depending on the specific application and board design.
The watchdog timer (WDT) on the UPD78F0552MA-FAA-AX can be configured using the WDT control register (WDTCTL). You need to set the WDT clock source, timeout period, and enable the WDT. Refer to the datasheet and application notes for detailed instructions.
The maximum current that can be sourced or sunk by the I/O pins of the UPD78F0552MA-FAA-AX is 20 mA. However, it's recommended to limit the current to 10 mA or less to ensure reliable operation and prevent overheating.
The UPD78F0552MA-FAA-AX has a built-in UART module. To implement a UART interface, you need to configure the UART control registers, set the baud rate, and enable the transmitter and receiver. You can use the Renesas Electronics Corporation's sample code and application notes as a reference.
The power consumption of the UPD78F0552MA-FAA-AX in sleep mode depends on the specific sleep mode and the configuration of the peripherals. According to the datasheet, the typical current consumption in sleep mode is around 1.5 μA. However, this value can vary depending on the application and the specific use case.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
UPD78F0552MA-FAA-AX Overview
Use the download button to access the UPD78F0552MA-FAA-AX schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like UPD78,
or try a keyword search, such as Microcontrollers
