The recommended PCB footprint for the V07E140P is a rectangular pad with dimensions of 2.5mm x 1.5mm, with a 0.5mm radius corner and a 0.3mm spacing between pads.
Yes, the V07E140P is rated for operation up to 150°C, making it suitable for high-temperature applications. However, it's essential to ensure that the device is properly derated to prevent overheating and ensure reliable operation.
To ensure proper soldering, use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder paste to the pads. Use a soldering technique that minimizes the risk of overheating the device, such as using a soldering iron with a low thermal mass or a hot air soldering technique.
The recommended storage condition for the V07E140P is in a dry, cool place with a temperature range of 5°C to 30°C and a relative humidity of 60% or less. Avoid storing the devices in direct sunlight or near sources of moisture.
Yes, the V07E140P is designed to handle high surge currents. It has a high surge current rating of 100A, making it suitable for applications that require protection against high-energy surges.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
V07E140P Overview
Use the download button to access the V07E140P schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like V07E1,
or try a keyword search, such as Non-linear Resistors
