The recommended PCB footprint for the V30DM60CL-M3/I is a rectangular pad with a minimum size of 2.5mm x 1.5mm, with a 0.5mm radius corner and a 0.3mm spacing between pads.
To ensure reliable soldering, use a soldering iron with a temperature range of 250°C to 260°C, and apply a solder flux with a moderate activity level. Avoid using excessive solder or flux, and ensure the component is properly aligned on the PCB.
The maximum allowed voltage derating for the V30DM60CL-M3/I is 10% of the rated voltage, which is 30V. Therefore, the maximum allowed voltage derating is 3V.
The V30DM60CL-M3/I is rated for operation up to 150°C, but it's recommended to derate the voltage and current according to the temperature derating curve provided in the datasheet. Above 125°C, the component's reliability and lifespan may be affected.
The V30DM60CL-M3/I has an internal ESD protection diode, but it's still recommended to follow proper ESD handling procedures during assembly and storage, such as using an ESD wrist strap, mat, or storage container.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
V30DM60CL-M3/I Overview
Use the download button to access the V30DM60CL-M3/I schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like V30DM,
or try a keyword search, such as Rectifier Diodes
