VLF12060T-6R8N7R2 - TDK

VLF12060T-6R8N7R2 Frequently Asked Questions (FAQs)

• What is the recommended PCB land pattern for the VLF12060T-6R8N7R2?
  The recommended PCB land pattern can be found in the TDK Corporation's application note or on their website. It typically includes a rectangular pad with a size of around 12mm x 10mm, with a 1mm keep-out area around the pad.
• How do I handle the thermal derating of the VLF12060T-6R8N7R2?
  The thermal derating of the inductor can be handled by following the guidelines in the datasheet. Typically, the inductor's current rating decreases as the ambient temperature increases. A general rule of thumb is to derate the current by 1% for every 1°C above the rated temperature.
• What is the self-resonant frequency of the VLF12060T-6R8N7R2?
  The self-resonant frequency of the inductor is not explicitly stated in the datasheet, but it can be estimated using the inductor's inductance and capacitance values. Typically, it falls in the range of 10-50 MHz for this type of inductor.
• Can I use the VLF12060T-6R8N7R2 in a high-vibration environment?
  The VLF12060T-6R8N7R2 is designed to withstand moderate vibrations, but it's recommended to consult with TDK Corporation or perform additional testing to ensure its reliability in high-vibration environments.
• How do I solder the VLF12060T-6R8N7R2?
  The recommended soldering temperature and time can be found in the datasheet or on TDK Corporation's website. Typically, a soldering temperature of 260-270°C and a time of 3-5 seconds is recommended.