The recommended PCB layout involves placing the VLM100E-24-T near the power source, using a solid ground plane, and keeping the input and output traces separate. For thermal management, ensure good airflow around the device, and consider using a heat sink if the operating temperature exceeds 40°C.
The VLM100E-24-T has built-in input voltage transient protection, which can withstand voltage spikes up to 40V for 100ms. However, it's still recommended to add external transient voltage suppression devices (TVS) for added protection.
The maximum allowable output capacitance is 100uF. Exceeding this value may cause instability or oscillations in the output voltage.
Yes, the VLM100E-24-T can be used in parallel to increase the total output power. However, it's essential to ensure that the input and output connections are properly synchronized and that the devices are thermally coupled to prevent thermal runaway.
The typical efficiency of the VLM100E-24-T is around 95% at full load (100W), 92% at half load (50W), and 85% at quarter load (25W). Efficiency may vary depending on the input voltage, output voltage, and operating temperature.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
VLM100E-24-T Overview
Use the download button to access the VLM100E-24-T 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like VLM10,
or try a keyword search, such as Power Supply Modules
