VLS3012ET-2R2M-CA - TDK

VLS3012ET-2R2M-CA Frequently Asked Questions (FAQs)

• What is the recommended land pattern for this inductor?
  The recommended land pattern for the VLS3012ET-2R2M-CA inductor is a rectangular pad with a size of 3.2mm x 2.5mm, with a non-solder mask defined (NSMD) pad shape.
• How do I handle the inductor's thermal considerations?
  The VLS3012ET-2R2M-CA inductor has a maximum operating temperature of 125°C. Ensure good airflow around the inductor, and consider using a heat sink or thermal interface material if the inductor will be operating near its maximum temperature rating.
• What is the inductor's self-resonant frequency (SRF)?
  The self-resonant frequency (SRF) of the VLS3012ET-2R2M-CA inductor is not explicitly stated in the datasheet, but it can be estimated to be around 100-150 MHz based on the inductor's physical characteristics and materials.
• Can I use this inductor in a high-reliability or aerospace application?
  The VLS3012ET-2R2M-CA inductor is a commercial-grade component and may not meet the requirements for high-reliability or aerospace applications. TDK Corporation offers other inductor products that are specifically designed for these types of applications.
• How do I determine the inductor's saturation current?
  The saturation current of the VLS3012ET-2R2M-CA inductor can be determined by consulting the inductor's BH curve, which is typically provided in the datasheet or upon request from the manufacturer.